Cold rolled stainless coil and sheet for forming, sheet-metal fabrication and distribution. For a 304 order, specify the grade, thickness, width and surface finish together with the required coil or sheet form.
Use these industry reference options to prepare your request. Send your required dimensions even if they fall outside the examples below.
These are selection references. Confirm the grade, dimensions, coating or finish combination, availability, quantity and delivery terms in the quotation. Grades under different standards are not automatically interchangeable.
Choose coil for slitting and forming, or sheet for cut-size fabrication. Specify the grade, dimensions and finish together so the material suits your equipment and finished part.
| Product option | Application | Order details |
|---|---|---|
| 304 grade and product standard | Cold rolled flat stainless for general fabrication and distribution. | Request 304 explicitly under the governing product standard, such as ASTM A240 or EN 10088-2. 304L is a separate grade; substitutions or dual certification require review of the order and MTC. |
| Coil or cut sheet | Coil feeds slitting and forming lines; cut sheet requires a finished length. | Give thickness, width, tolerance and edge condition. For sheet add length; for coil add ID and maximum unit weight. |
| 2B, BA or polished finish | Select the finish for appearance, fabrication and cleaning requirements. | State finish, protective film and acceptance criteria. For polished material include direction and the approved sample when needed. |
304 is an austenitic stainless grade used in general fabrication. 304L has a lower carbon limit and is a separate grade. Specify the designation and governing product standard required by your drawing, such as ASTM A240 or EN 10088-2. Any substitution or dual certification must be checked against the order requirements and mill test certificate.
Service conditions also matter. Chloride exposure, coastal conditions or chemical cleaning may require a different material selection. Include the application when seeking a grade recommendation.
Choose coil for slitting and forming lines, or sheet for finished cut sizes. Provide thickness, width and tolerances; for sheet add length, and for coil add inside diameter and maximum unit weight.
State 2B, BA or the required polished finish. For polished surfaces, include direction and the approved sample where needed. Specify protective film, edge condition and packing requirements for fabrication and transport.
Send your grade, coil or sheet form, dimensions, finish and quantity. Add the destination port and attach a drawing or purchase specification if available. Availability, minimum order and lead time are confirmed for your requested specification in the quotation.
Match heat identification, grade and test results to the mill test certificate. Agree dimensional and surface checks, together with any additional inspection required by the purchase specification.
Send grade, standard, dimensions, and delivery requirements for a matched product quotation.
| Property | Value |
|---|---|
| Product identity | |
| Product | Cold Rolled Stainless Steel Coil and Sheet |
| Material | Stainless Steel |
| Product form | Coil |
| Process and connections | |
| Manufacturing process | Cold Rolled |
| Parameters to include in your inquirySend your dimensions, quantity and destination port. Attach a drawing or specification if available. | |
| Grade | Exact grade under the chosen standard; include service and forming requirements. |
| Standard | Product standard and edition required by your drawing or purchase specification. |
| Thickness | Nominal stainless steel thickness in mm, tolerance and the governing dimensional standard. Specify protective film separately. |
| Width | Width in mm, tolerance and mill or slit edge requirement. |
| Delivery condition | Required delivery, heat-treatment or processing condition under the chosen product standard. |
Cold rolled stainless coil and sheet for forming, sheet-metal fabrication and distribution. For a 304 order, specify the grade, thickness, width and surface finish together with the required coil or sheet form.
Packing, inspection & delivery documents
Include packing, material certificate and inspection requirements so costs and delivery arrangements can be reviewed together.
Specify heat and lot traceability, composition and properties under the order standard. Agree dimensional measurements, tolerances and surface acceptance, using a reference sample where needed. Include the required EN 10204 3.1 inspection certificate, unit identification and additional inspection scope in the order. Document review does not replace validation of the final application.
Representative export packing and loading evidence. Final packing follows the approved order.
Order planning
Include quantity, destination, handling and inspection requirements in your inquiry.
Specify batch identification, surface protection, storage and unloading requirements. Availability and shipment terms are confirmed in the quotation.
Include the certificate, heat identification and checks required by your order. Request third-party inspection or a visit for confirmation of scope and arrangements.
Specify end use, environment and processing requirements so the material can be reviewed against your project. Formed and fabricated sheet-metal components selected by grade and finish; Panels, equipment enclosures and decorative components with agreed surface acceptance; Cutting and distribution to the buyer’s material and dimensional specification
FAQ
304 and 304L have different requirements. Check composition, properties, product standard and the inspection certificate against the order. Dual certification must satisfy both sets of requirements; a commercial name does not establish compliance. Any substitution requires buyer approval.
State the finish, visible face and acceptance criteria. For polished surfaces, add polishing direction, an agreed sample and roughness where required. Abrasive grit alone does not guarantee identical appearance or roughness. Agree protective film and removal conditions for processing and storage.
For coil, provide inside diameter, maximum unit weight, width and edge requirements to suit your line. For sheet, add length, flatness, squareness and cutting requirements. Both need thickness, tolerances, grade, finish, quantity, destination and required documents.
Send the grade, standard, coil or sheet form, dimensions, finish, quantity, application, destination port and required inspection documents. Drawings and acceptance samples help align the quotation with the finished part.
Related products
Compare related grades and product forms for your application and order requirements.
Specify the stainless grade and standard, coil or plate form, thickness, width and surface condition. Add coil limits or plate length, inspection documents and packing requirements for a quotation.
Specify round, square or hexagon bar, grade, standard and delivery condition. Include diameter or section size, length, tolerances and machining requirements, with quantity and destination for a quotation.
State the spring or weaving application, stainless grade, governing standard, wire diameter and tolerance. Add the required delivery condition, mechanical properties, surface and spool or coil limits for a quotation.
Product family
Compare related products in the Stainless Steel Products range, or request a quote for this specification.
Request a Quote
Send the grade, standard, coil or sheet form, dimensions, finish and quantity. Add your application, drawing, destination port and protection or inspection requirements for a quotation matched to your order.
